Recycled Log Stereo

I needed tunes for the greenhouse. I was outside in my driveway splitting wood for our fireplace when I saw this one piece and the beauty of the grain got me to thinking...
I have a couple car stereos that are lacking cars at the moment, so why not see what I can put together from what I have lying around? So far, I've purchased nothing. Everything was stuff I've had "left over":

- Log, cut from one side of the "Y" split and including a bit of bark
- Clarion DXZ865MP
- Infinity Kappa 4"
- Infinity Kappa 6x9
- old 300W ATX PC power supply

First, I made a bunch of plunge cuts with the chainsaw. I gauged the correct depth by always going to the near-edge of the "H" in "HUSQVARNA".
I used a jigsaw to cut the holes, a power hand-planer to make it flat, a belt sander to make it smooth (60, 80, then 120), and a reciprocating sander for the final smoothing (220 grit).
I used a jigsaw to cut the holes, a power hand-planer to make it flat, a belt sander to make it smooth (60, 80, then 120), and a reciprocating sander for the final smoothing (220 grit).
This is why I couldn't bring myself to turn this particular piece into firewood. Look at that grain!
After a test run, I decided that just having the two 4" speakers provided too "tinny" a sound, so I added some 6x9's as well.

Up and running with a couple coats of poly on it.
It lives in our greenhouse, where I hope its recycled nature and natural nature is appropriate.
Refinements to be added: + 12v cigarette lighter port, for powering iPod and the like + feet (replace the rocks currently stuck under it to keep it level) + external battery (old car battery) + constant charge via small solar panel I have all this stuff hanging around, I just need to install it.

at-speed

Recycled Log Stereo